Monday, January 26, 2015
Introducing a new contributer... DJ Discdolo
Check his twitter here.
Mixcloud
Soundcloud
Wednesday, January 21, 2015
Monday, January 12, 2015
Some technical tips for Serato.
Recently I've come across a few issues using Rane SL boxes with my computer and other peoples. I had an issue one time where I couldn't get Serato to actually start, not knowing that the SL1 box I was connected to was a USB 1.0 device which (because of the specs of a Core I series computer) is incompatible with my machine. Imagine showing up to a gig and not being able to perform because you can't figure out a "simple" hardware issue.
Luckily, I also use Traktor and a controller so I wasn't left completely in the lurch. After I got home, I got online, determined to solve this problem. I searched forums and tech guides and eventually found out that USB 1.0 devices will not work properly on Core I series computers with USB 2.0 or higher specs. This is why the SL1 was discontinued.
Continuing to research, I finally discovered a solution (and a simple one at that) to the problem. A USB 2.0 hub will allow the SL1 to be read by the computer. I haven't had the issue since.
Another thing I discovered is that Serato should always be installed and run in Administrative mode. The program takes priority over the audio system, reading and writing to the hard drive (file permissions come into play here), a certain amount of memory and the processor. Another issue that this will help resolve is driver installation and sound card recognition. Rane SL boxes will not start up unless the drivers have been installed with elevated privileges and the software must be installed or started the same way in order for them to work properly. Installing the software in this way will avoid any issues but if you have already installed the software as a user then simply start the software in Administrative mode and the issues will be resolved.
These 2 tips have helped me get up and running with minimal effort and I haven't had issues since I adopted these techniques. I hope it helps you... Peace.
Luckily, I also use Traktor and a controller so I wasn't left completely in the lurch. After I got home, I got online, determined to solve this problem. I searched forums and tech guides and eventually found out that USB 1.0 devices will not work properly on Core I series computers with USB 2.0 or higher specs. This is why the SL1 was discontinued.
Continuing to research, I finally discovered a solution (and a simple one at that) to the problem. A USB 2.0 hub will allow the SL1 to be read by the computer. I haven't had the issue since.
Another thing I discovered is that Serato should always be installed and run in Administrative mode. The program takes priority over the audio system, reading and writing to the hard drive (file permissions come into play here), a certain amount of memory and the processor. Another issue that this will help resolve is driver installation and sound card recognition. Rane SL boxes will not start up unless the drivers have been installed with elevated privileges and the software must be installed or started the same way in order for them to work properly. Installing the software in this way will avoid any issues but if you have already installed the software as a user then simply start the software in Administrative mode and the issues will be resolved.
These 2 tips have helped me get up and running with minimal effort and I haven't had issues since I adopted these techniques. I hope it helps you... Peace.
Saturday, January 3, 2015
Thick - A Burlesque Revue Every First Thursday.
I'll be holding down the decks here as well. Great performances by some very interesting Burlesque characters, artists and poets.
Arrow Bar grand closing - Avenue A and 4th St. Lower East Side
I will be on the decks and broadcasting live after Midnite at Ustrem.tv/dj-Adminster at the grand closing of Arrow Bar with SNKRJOE and the crew. Avenue A and 4th St. In the L.E.S. Come through or tune in.
Open Turntable at LP and Harmony... Manhattan Ave. and Grand St. Brooklyn
Today from 3pm to Midnite Mike Marquez and myself will be hosting an open turntable at LP and Harmony. 21 and older. iD a must. Come through. If we can be you in for a 1 hour set... You're on. We have 2 CDJ 800's, 2 Technic 1200's, a UREI Rotary Mixer (for the real house heads) and a NOX-404 mixer with a Serato SL4. Bring your laptops, needles and slip,ate. Traktor is welcome.
Subscribe to:
Posts (Atom)